A stand alone highspeed-camera, working in both worlds: HD and uncompressed RAW up to 4.000 fps.
The WEISSCAM HS-2 is the newest, uncompressed digital highspeed camera for framerates up to 4.000 fps. It is developed as a standalone camera aiming especially the needs of cinematographers. Coming with an easy workflow, two Streams (RAW + HD) via HD-SDI, two formats (4:3 + 16:9) and cinema-style images, it is designed to offer you the freedom of shooting either in HD or RAW mode.
The WEISSCAM HS-2 has a full Format Super35 CMOS Sensor with a global shutter. By using the Interchangeable Mount System (IMS) from P+S Technik you can attach nearly every lens on the camera (PL Mount, Nikon F-Mount, Panavision Mount, etc.) and also change the mount within a few seconds.
An intelligent master/slave DC/DC power management saves the camera from any short circuit and makes it needless to turn off the camera for a battery change.
Many mounting possibilities allow you to connect additional accessories like onboard monitor, lens control system, etc. and power them by the several outputs of the DC/DC board.
The very fast boot up time allows you to be ready for shooting in less than 7 seconds.
CONTACT US FOR HIRE RATES.
|Frame Rates||1.500 fps in 2K
2.000 fps in 1080p
4.000 fps in 720p
|Max. Speed||72.275 fps in 100×100 Pixels|
|Signal||RAW Signal: 12 bit uncompressed WEISSCAM RAW
HD Signal: 10 bit YCbCr 4:2:2
|Signal Output||1280 x 720p: 50p
1920 x 1080: 23,98psf, 24psf, 25psf, 29,97psf, 30psf
1920 x 1080 Dual Link: 50p, 59,94p, 60p
2K: 25p (1920 x 1080 preview)
Signal Output formats vary between HD and RAW, as well as HD-SDI Single Link and Dual Link
|Sensor||Single CMOS (22,18 x 22,18 mm)|
|Internal Memory||32 GB|
|Dynamik Range||8 – 10 T-stops, up to the selected curve|
|Lens Mount||Interchangeable Mount System (PL, Panavision, BNC-R, Professional, Nikon F, Canon EF, Canon FD, Leica-R, Leica-M)|
|Power||24V DC, Fischer 2/pin|